Mifi 2200 mobile hotspot review

Mifi 2200 mobile hotspot review

I recently swapped my Hugesnet Satellite system for the Verizon Mifi 3g mobile hotspot. So far I have been very happy with it.

I was at fist concerned about signal strength as we sometimes drop cell calls at our house. My plan to was to find somewhere in the house that had a good signal and then use a router as a repeater. However, in actual use, it picks up everywhere in the house. I just sit it near what ever computer I am using or, if it is charging, just lay it in the floor in the hallway.

This past weekend, I took the device to my mother’s house so she could test it. She currently uses the Verizon USB modem. To get reception in her computer room, she has to plug the modem into a long USB extension cable and tape the modem to the window.

My Mifi needed charging so I sat in on her sewing table well away from where hers gets a signal while I booted up my lap top. I let it connect to the wireless signal and I planned to move it once it charged up a bit. However, to my surprise, it had plenty of signal right where it was. This was in the center of her basement where cell phones hardly work.

She was able to connect with her laptop and carry it upstairs while the Mifi sat in the basement plugged to the charger. Both of us were amazed at the signal strength not only of the wireless signal but also the cellular reception.

So far the only disappointment has been that the tethered mode of plugging the Mifi into my computer via the USB cable refuses to work. I had hoped to use tethered mode while in the car to avoid running down the battery in the Mifi. My computer uses XP so I suspect that there is some problem with the installer it my older version of windows. I gave up trying to use tethered mode as the wireless mode works so well. The battery life is several hours so it has not been a problem yet.

In order to connect my desktop computer to the Mifi signal, I used dd-wrt software to convert my old router to client mode. The router automatically recognizes the Mifi anytime it is turned on and logs in automatically. All, I do is turn on the Mifi hotspot and in a few seconds, I am on the internet with the desktop.

When using my laptop, I always have to hit the refresh button to see available wireless connections before it will see the Mifi. But once I click refresh, it connects automatically.

I have the 3GB per month plan and so far I am on target to use about that much. The satellite plan gave me 200MB per day so I am accustomed to working within bandwidth restrictions. I use Opera in Turbo mode to save bandwidth when possible. However the other users in my house just browse as they normally would.
[phpbay]mifi, 10[/phpbay]

Using dd-wrt to convert a Linksys router

Using dd-wrt to convert a Linksys router

When I got my MiFi device to replace my satellite modem, I had to figure out a way to share the internet signal with the other computers on my home network. At first I thought I could just use the UBS connection on the MiFi and then use the desktop computer as a gateway for the other computers. Well, I never could get the USB modem software to run on my old XP computer.

I then thought I would just buy a wireless USB device to plug into the desktop. However the cost of these at Wal-Mart was more than I wanted to pay. I started to order one from Tiger Direct but then I found a different solution.

I found that I could convert my router that I no longer needed into a device by running it in “Client Mode.” Unfortunately my Linksys router did not support client mode.

A few more Google searches revealed that I could replace the firmware with some from dd-wrt.com and make it run like I needed it to.

At first I was scared from the dire warnings that I could easily convert my router into a paper weight if I did not carefully follow the instructions. But I eventually decided to give it a try.

I found my router listed in the wiki and printed out the instructions. I downloaded the appropriate files. I then reset the router just like in the instructions. I actually used a stopwatch to make sure I held the button down for the correct amount of time.

Holding the button down while disconnecting and reconnecting the power was the hardest part of the job for me. Well that and the waiting five minutes between changes near the end of the procedure. If I had not used a stopwatch I am sure I would not have waited long enough. I got very impatient, but I read where not waiting was the most common error people make in installing the software, so I waited it out.

The instructions were very easy to follow. I just checked off each step along the way. Everything worked like it was supposed to and my Clint mode ran first time. The router automatically syncs up with the MiFi whenever I turn it on. It runs in secure access mode so I don’t have to worry about my neighbors using up my bandwidth.

See http://dd-wrt.com for more info on the router modification.

Real Estate Mortgage – Seven Important Questions

Real Estate Mortgage – Seven Important Questions

When shopping for a real estate mortgage, many questions arise. Often the advice from friends and family is confusing and misleading. There are many rumors and old wives tales concerning real estate financing, so I asked a mortgage broker to get the real answers.

1. Are there any programs that can help a single parent get a loan?

Yes, there are. One program in our state is the THDA or Tennessee Housing Development Agency. Other states will have similar programs. The THDA provides grant money to assist with making a down payment on a home loan. Another program which helps single parents is the USDA. The USDA provides 100% financing in some situations. Your mortgage broker can give you more information on these programs in your situation.

2. If a single parent has had an FHA loan before, can they qualify for another FHA loan?
Yes, but restriction may apply. You will need to discuss the qualification requirements with your mortgage broker. A good broker will help you through the qualification process.

3. What is an FHA loan?

An FHA loan is a standardized mortgage loan that is easy to obtain. The advantages of the FHA loan are no prepayment and it is backed by the US government making it easier to qualify at a lower interest rate.

4. What items do lenders look at when someone is applying for a loan?

Al lenders will look at the same qualifying factors: Credit history, Income and Assets. When applying for a loan, you will need to give the lender access to your credit reports and provide proof of income and your assets.

5. How long after a bankruptcy does someone have to wait to get a home loan?

Typically the wait is two years. However there are many variables and the rules have been changing lately. Contact your mortgage broker for the latest information.

6. How can someone rebuild credit to be able to qualify for a home loan?

One suggestion is to add a secured credit card and leave it at a zero balance. Check your credit report and dispute any negative items. But, the most important step is to just be patient and let the negative items fade away with time.

7. What is the recommend down payment for a home mortgage?

Three and a half percent is generally the minimum. That would be $3500 on a $100,000 loan.

Knowing the answers to these common questions can help you be more prepared when you contact a loan officer about a home loan or other real estate mortgage. There are many online resources that can help you determine you collect the information needed to prepare to apply for a loan.

To learn more about a mortgage or refinancing, contact Hometown Lenders of Clevalend

Promoting Interest in Safety

Promoting Interest in Safety

One of the common subjects in any safety reference is how to get people interested in safety. Apparently, not getting hurt is not enough motivation for people to be interested in safety. Personally, I prefer to avoid getting injured whenever possible so working safely is just part of my work ethic.

Looking at a 1964 issue of the National Safety Council handbook, they suggest using “a pretty girl” to promote interest in industrial situations. They also recommend “a shaggy dog.” I guess there were not as many women working in industry back in 1964 as there are today.

The 5th edition of the Accident Prevention Manual suggests Using Pretty Girls to promote safety.

I notice that from internet search data that promoting safety is still a big concern for managers. Safety slogans and other safety promotional ideas still rank very highly.

However, it is my observation that all such safety promotions are basically useless. Unless you change the fundamental culture of the workplace, accidents will continue to happen and people will continue to get hurt no matter how many pretty girls hold up safety banners.

In order to create a safe working culture, we first need to consider why people get injured at work. Often injuries are caused by inattention to the job or by taking short cuts. Next we must consider why people take chances with their own safety either by not paying attention or by taking shortcuts.

I often see managers who perceive those who get hurt on the job as being lazy or who are otherwise not trying to do a good job. Often, however, the exact opposite is true. These people want to do a good job but due to their own lack of skill or understanding of mechanical principles, they take unnecessary risks. They may not realize how much danger they are facing; they are simply trying to do the best job they can with minimal effort on their part.

People who get injured may also be unconsciously punishing themselves. It the work environment is oppressive and devoid of positive reinforcement, they may injure them selves in an unconscious effort to prove that they are working as hard as they can.

In order to create a safe working environment, we can begin by placing clear expectations on the work that is to be preformed. By providing clear and detail work instructions that describe the safe and effective way of doing the job, employees will be less inclined to experiment with potentially unsafe methods. Supervision can play a huge role in insuring workers follow the safe work procedures by observing the work. If the procedures need to be changed to match current practice, then the revisions need to be investigated and implemented without delay. Employees should not be allowed to deviate from the prescribed safe and effective work instructions.

Care must be taken by supervisors not to reward unsafe procedures either by actively supporting unsafe practices or by ignoring them. If safety shortcuts are allowed to become part of the routine, a safety culture cannot be established.

For more information on creating a safe and effective working environment, see my other articles. Safety promotions become unnecessary once a safe and effective work environment has been established.

100 Acre Wood rally

Trip to the 100 Acre Wood

I was once again given the job as Steward for the Rally America 100 Acre Wood Rally. It was held in Salem Missouri, the last weekend of February.

I headed out on Thursday and after driving through some huge thunder storms arrived in time to observe registration and Tech inspection. Both were held at the Dent County fire Station which shows the kind of support they get form the community there.

It was fun to connect with some rally people that I have not seen in a couple of years. I found out that the former organizer of the even Kim Demotte was driving his old Datsun 510 in the event. It as fun to see Kim behind the wheel and in a very well prepared old Datsun.

I caught up with my fellow stewards and we made a plan for the weekend. I went back to my room at the holiday inn and studied the maps and route books. I sat in on the Novice driver class and part of the worker training meeting.

The first day of the rally started in Potosi which is about a two hour drive from Salem. I plotted a route that would take me past a couple of the stages that were to be used later in the day so I could check them out.

I enjoyed the delicious Holiday Inn Express cinnamon rolls while I chatted with the other stewards and other people from Rally America. I looked out and saw that it had snowed overnight. Eventually I headed out to Potosi.

I turned off on TT to check out stage 6. I was quickly met by Road Closed signs and after driving past them, I saw the cause. One of the many low water crossings was flooded by the huge storms that had passed through the area the day before.

In this part of Missouri, they don’t build bridges much. They just pave the bottom of the creek beds. Sometimes they build a small elevated concrete platform to with some culverts so that some of the water can flow under and the rest flows over when it rains. Due to the heavy rains, the creeks were very deep.

I made my way to the start of the stage and was able to get through. The stage road was fine but I then became trapped by the high water again. I had to reverse my course and find another way out.

I met up with the Safety Steward who was looking at the spectator area on stage 5. We both found that we could not follow our proposed route due to very high water on one of the longer crossings. We had to plot a different course that took us out of the way but generally toward Potosi.

I made it to the Parc Expose in Potosi just as cars were starting to arrive and helped set up the first MTC and the start of the Super Special Stage. The Super Special was a rally cross like course around the fair grounds there.

There was a big puddle of water on the inside of the final turn right at the finish line. It was fun to watch the cars splash through. The finish control workers eventually decided to move to the other side of the road to give the competitors more room.

After watching a few cars run the Super Special, I headed out to the first forest stage. Due to some flooding o the transit, the rally master rerouted the course. I observed to make sure every thing was handled correctly and it was. We received a report that Travis Pastrana had crashed on the stage. After the stage was run, I followed the sweep team and helped them drag what was left of Travis’s car to a safe place off the road.

Travis’s Navigator remembered me when he saw me. I had towed his car back to service in one of the Cherokee Trails rallies.

Near the end of the stage I came across one of the participants in our rookie school from the night before. His car had a coolant leak and the engine computer had shut it down on low water. I gave him a jug of anti freeze from my Jeep and some bottles of water. He filled it up and drove to the end of the stage.

I stayed at the finish and watched the second pass through the stage. It was much less eventful than the first.

After that I headed to Steelville to check out service. Along the way, I saw one of the competitors disabled along the transit. I picked them up and gave them a ride to service.

After service in Steelville, I checked on the control checking crews out and then headed back to Salem. I was dark and late when I got back. The stewards met with the Rally Chairman to make adjustments to the procedures for the next day.

Saturday started early with a 7:30 am stewards meeting. I enjoyed the delicious Holiday Inn Cinnamon rolls again. Then I headed to the downtown Parc Expose. I wandered up and down the street looking at the cars and talking with the competitors.

After Parc Expose, I headed out to observe the start of the stages. This stage was repeated directly and I was concerned that they would not get it cleared in time. However, the Rally Master had prepared well and the stage was restated on time.

However after just a few cars started, one crashed blocking the stage road. The remaining cars were turned around and sent to the next stage. I transited the stage and ended up assisting the sweep jeeps with moving the car and a a huge rock that the car had moved into the road.

Luckily then Jeeps were equipped with winches and we were able to easily winch the car off the road and then move the big rock out of the road as well. Moving the rock was a bigger challenge than moving the car but with some simple rigging of a strap and a snatch block, we were able to get it clear of the road.

I then moved down to stage nine to make sure that the lack of transit times had not caused too much trouble for the control workers. After the stage I decided to follow the sweep vehicles again to see if they were doing their job correctly. Just a short way into the stage, there was a Honda stuck just off the road. The fast sweep had stopped to give them a chance to get back in the rally. I Pulled off the road well behind all the sweep vehicles and assisted in the recovery as well as checking on the competitors.

When it was all cleaned up, I walked back to my Jeep and noticed that the door would not open. I looked closer and realized that the Sweep truck had backed into my fender pushing it into the door. I had to dig in the back to find a pry bar to move the fender so I could get in. I caught up with them later and asked the guy about hitting my Jeep. He tried to deny he had hit it but them I showed him the matching scrape on the side of his truck.

I drove on to Viburnum to check on service there. After service, I headed up to Stages 12 and 14 which was a turn around stage. I assisted in setting up the finish control where the start had been. The control workers offered me a sandwich. I guess I looked hungry and I was.

I worked my way back to Salem in time for the champagne spray for the winners. They can’t use real champagne due to Salem’s laws about open containers of alcohol so they use sparkling grape juice.

The awards party at the eagles lodge lasted well into the morning. I made it back to my room and fell asleep around two am.

The drive home on Sunday was pleasant with much better weather than the trip out. I missed a turn. I ended up north of my intended route but found an interesting mining museum. It was not open but I took time to explore outside the fence and found it very interesting. It did not say what they mined there, but since the towns have names like Steelville, Iron Town and the like I assume they mined iron ore.

I crossed the Mississippi at Cape Gerardo. The Mississippi river was much higher than it had been on the trip out.