The Jeep Guru – Page 11 – Jeep Performance Improvement Ideas

May 27, 2019June 14, 2019

Porsche 944 Torque Tube Bearings

I rebuilt my 944 Torque Tube

At Track Night I noticed a whirring noise when I was idling on grid in neutral. The noise would go away if I mashed the clutch pedal. I had heard a similar noise on the back straight at Road Atlanta back in February, so I decided to check into it closer.

With the car on the lift idling in neutral, there was definitely a noise coming from the middle of the torque tube. I decided it was time to change the bearings.

I read through the procedure on Clarks Garage. I also watched some Youtube videos. These looked intimidating, but I decided I had to give it a go.

I began by removing the shifter from the rod and the torque tube. I then removed the transaxle.

May 22, 2019June 14, 2019

Time

I have been fascinated by time for as long as I can remember. Clocks amaze me,

I even saved up my money to buy one of the first LED digital watches wen I was in High school.

May 16, 2019May 16, 2019

May Track Night in the 944

Testing the new Mass Air Flow sensor at AMP

Track Night in the Porsche

Just getting to Track Night was an adventure this time. I decided to try out my new to me Ford F250 tow vehicle. I first took the trailer to work with me before heading down to Atlanta Motorsports Park.

May 5, 2019May 6, 2019

Distributor (Cam Sensor) wiring repair XJ

Correcting a problem with the wires to the distributor on my XJ

One of the triggers to my engine swap was I thought my distributor was bad. I had a no start condition and a code for the cam sensor that lives int eh distributor. So I ordered a new distributor and and new engine for it to go in.

May 1, 2019May 1, 2019

Weathertech Floor Mat review

I got Weathertech mats for my Ford pickup.

My new tow vehicle needed some floor mats to protect the slightly worn carpeting. I wanted something durable and nice looking. I decided to spend some money and try the Weathertech mats.